GM-HP · 110TBottom-Acting Drawing Presses
Four-column drawing presses with a fully automatic cycle, for forming pots, lids and similar deep parts from below.
Gülsu Makina · Kahramanmaraş, Türkiye
Presses and dies, built under one roof
Hydraulic, servo, eccentric and pneumatic presses; deep drawing and industrial dies; turning and milling. From a 1-ton workshop press to a 1000-ton production-line press, we design the machine and the die that runs on it in the same workshop, and build them to exact dimensions.
19+ YRSManufacturing experience
1–1000TONPress capacity range
4DRIVESHydraulic · Servo · Eccentric · Pneumatic
Our latest machine · 110 t
Gülsu Makina
110-ton bottom-acting deep drawing press
110 tons4 columnsFully automatic
About
We stand behind every machine that leaves our workshop
CompanyGülsu Makina
LocationYavuz Selim Mah.
CityDulkadiroğlu / K.Maraş
Experience19+ years
Gülsu Makina is a machine builder in Dulkadiroğlu, Kahramanmaraş, Türkiye, manufacturing hydraulic and pneumatic machinery, cutting and deep drawing dies, and carrying out all kinds of turning and milling work. We combine more than 19 years of experience with an engineering-driven approach to manufacturing.
The same team welds the frame, turns the columns, plumbs the hydraulic unit and mills the die. We listen to the customer's product and design the press and the die together around it, so the machine and the die fit from day one and commissioning is short.
Academic collaboration: We take an active part in university projects and give priority to academic work. We build presses, dies and test rigs for research teams in our own workshop.
Built to exact dimensions: Every part is machined to the dimensions on its drawing and checked before assembly. Out-of-tolerance parts never reach the assembly.
We use 3D modelling and finite element analysis (FEA) at the design stage and verify the frame under load before manufacturing starts. On the control side, PLCs and touch-screen operator panels give recipe-based, repeatable production.
Press buildingHydraulic, servo, eccentric, pneumatic
Die makingDrawing, cutting, forming, embossing
MachiningTurning and milling to exact size
AutomationPLC · HMI · recipe control
Academic supportUniversity projects are a priority
Spare partsFrom a sample or a drawing
Our latest machine
110-Ton Fully Automatic Bottom-Acting Deep Drawing Press
Four-column frame with the main hydraulic cylinder on top and the drawing unit below. The frame is built from high-quality 1060 steel. The blank is placed in the die, forming is done from below, and ejector pins lift the finished part onto the table.
- Capacity
- 110 tons
- Type
- Four-column hydraulic press
- Forming
- Bottom-acting drawing, fully automatic cycle
- Frame material
- 1060 steel
- Controls
- Control cabinet and two-hand buttons at the table
Product range
Presses and special machines
Every machine is designed around the customer's part, capacity and line. The machines below were built in our workshop; dimensions and capacity are set per order.
Sheet02 / Products
Capacity1–1000 tons
GM-HP · 110T
GM-SVServo Spinning Machines
Servo-driven spinning head, touch-screen operator panel and stored recipes. It repeats the same dimension on every part in series production.
GM-HFJeweller's Presses
Enclosed hydraulic presses with PLC and touch screen, from a 20-ton model to a model with adjustable force between 1 and 150 tons; with pressure gauge, foot pedal and a guarded work area.
GM-4KFour-Column Hydraulic Presses
Column-guided hydraulic presses for cutting, bending, forming and assembly. Table size and stroke are set by the job.
GM-CC-Frame Hydraulic Presses
Open-gap frame with access from three sides, T-slot table, two-hand control and an FEA-verified frame design.
GM-EX
Eccentric Presses
Mechanical presses driven by a flywheel and eccentric shaft, for cutting, punching and high-volume sheet forming that needs a high stroke rate.
GM-PNPneumatic Presses
Fast column-guided presses with pneumatic cylinders, used in drawing and edge-finishing stations, riveting, marking and light cutting.
GM-KKEdge Trimming & Beading Machines
Fully automatic edge trimming and beading machines, including models combined with rim cutting; the finishing station of pot, bowl and lid lines.
GM-DHPattern Rolling Mills
Gear-motor driven rolling mills with patterned rolls that emboss a pattern into strip material.
GM-EKCircle Shearing & Rim Trimming Machines
Cuts circles from chrome, steel, aluminium and copper sheet from 0.30 mm up to 5 mm thick, depending on the model. Rim trimming models cut the edge of drawn parts to size.
GM-MHLaboratory & Manual Presses
Compact hand-pump presses with pressure gauge, for university laboratories, sample preparation and small workshop jobs.
GM-CUSTOM
Custom Machine Design
Bring us your part drawing or a sample and we will decide on the press, the die and the automation together, from concept to commissioning.
Dies and machining
From drawing dies to machined parts
We make industrial dies for every press class from 1 to 1000 tons. Die components are turned and milled to exact dimensions, and every die is tried out on a press before delivery.
Sheet03 / Dies
Press class1–1000 tons
Drawing dieBottom- and top-acting drawing, multi-stage drawing, split dies
Cutting diePunching, cutting, trimming
Turning & millingShafts, columns, bushings, tables, T-slots
Exact dimensionsDimensional check before assembly
How is a Gülsu press born?
Seven stages from design to commissioning
Every stage is done in the same workshop by the same team. Click a stage to watch the video from that point.
Sheet04 / Process
Stage01 / 07
Video playing
Engineering
Calculated first, then drawn for the shop floor
We build every machine in the computer before we build it in steel. The frame is analysed under load, parts reach the workshop with manufacturing drawings, and the control software is developed together with the machine.
Sheet05 / Engineering
Method3B · FEA · PLC
F = p · A
Finite element analysis
The frame is checked for deformation and stress under working load. Weak spots are found before manufacturing and reinforced on the drawing.
σ ≤ σem
3D modelling
Parametric models and production-ready drawing sets mean every part is made to size.
PLC · HMI control
Touch-screen operator panel, stored recipes and safety chain.
Servo drive
Position- and speed-controlled servo spinning for repeatable dimensions.
Precise surfaces
Fine workmanship on pattern rolls and die surfaces.
3D assembly
Assembly videos from our SolidWorks models
3D models of presses we drew in-house. Parts drop into place from largest to smallest; every video was generated directly from our own SolidWorks assembly file.
Sheet06 / Assembly
Model6 presses · SolidWorks
Our work
Machines and dies from our workshop
A selection of machines and dies we have built and delivered. Specifications come from the machines themselves and from our posts on Instagram, @gulsumakine.
Sheet07 / Work
Projects—
Company contacts
Talk directly to the people in charge
For quotes, technical discussions and service requests, contact us directly.
Contact
Tell us about your part, and we will build its press together
AddressYavuz Selim Mah.Marangozcular Cad. No: 60, 46100 Dulkadiroğlu / Kahramanmaraş
Open in Google Maps ↗
Instagram@gulsumakine
Open profile ↗
Phone
+90 543 656 93 72 · Hacı Ömer Akgül
+90 532 458 09 98 · Hacı Ömer Akgül
+90 530 035 30 03 · Ali Furkan Akgül